![]() ![]() Wi-Fi when you connect a network cable and it will keep the same IP address Wansview NCM625GA Cameras can automatically disconnect In about 1 minute, you will see the status light changes, indicating it is connected Seconds the WPS button will usually start flashing. You can also use manufacturer's mobile app to connect it to the network.Īccess point/router supports WPS, then it is very easy to connect your deviceĬamera and press the WPS button on your Wi-Fi access point (router) for 3 Router does not support WPS, then you can connect the camera with the Please read the product manual for detailed instructions. Otherwise, there are several ways to connect the IPĬamera to your Wi-Fi network. If you want to use wired connection, you just need to connect the Ethernet cable. To the network and find IP address 1.1 Connect camera to the network If you have finished these basic steps before, Manufacturer for all camera-related issues and contact us only forĬameraFTP-related (cloud service / FTP) issues. It may not be accurate or completely up-to-date. ![]() The information provided isīased on our knowledge of the model Wansview NCM625GA Pro HD 1080P Pan/Tilt WiFi Camera. Replace the product manual from the manufacturer. Supported for video recording when the motion sensitivity is set to 100.ĩ/10 (strongly recommended for 1080P video/audio monitoring) Supported for both image and video clip based recording
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |